Home	Shop Online	Email

THE AEC-200 LONG REACH  SPOOL GUN 

One of the most useful items in your shop is the "mig spool gun".  It's main drawback is that because of its "bulk" and short neck it can be very difficult to reach into tight spaces. the AEC-200 "Long Reach" Gun has a flexible neck with an 11" (28 cm) reach.

This is a mig wire feeder and mig gun in your hand! With this gun you can easily weld, aluminum, stainless steel, carbon steel, aluminum bronze, silicone bronze, or any filler metal on a 4" spool. If you have a special application you can always spool a small amount of wire for a special job.

Why you should consider the AEC-200 

1. The AEC-200 spool may look familiar to you. the beginnings of this spool gun go back to World War 2, yes we were welding aluminum (in the spray mode with constant current power supplies)-in World War 2! The original patents were on the motor in the handle and using the power supplies DC welding voltage to power the DC drive motor. These guns were originally manufactured by Airco, it was referred to as the "20-E" gun. If you found a Blue version-it was a Miller, a Black version was a Glenn, a yellow version was a Chemtron, if the back half was black and the front clear, it was a Lincoln! All the same gun, there are thousands out there and we have repair parts for them! This spool gun has SUSTAINABLE TECHNOLOGY, this is term that will become of more and more important in the years to come!

2. The AEC-200 spool gun uses a solid state DC motor control.. The advantage of the electronic control is simple; at the slowest speed (1RPM) you have full motor torque. The control assures that you have consistent wire feed speed at any speed setting with all sizes of wire.

CLICK HERE TO VIEW THE SPOOL GUN  INTERIOR

3. One mig gun for wires from all your welding applications. Steel and stainless steel wire .025 through 1/16". Aluminum wires .023 through 3/64" wires. An excellent gun for aluminum bronze and silicone bronze welding.

 CLICK HERE OT SEE WHY THE AEC-200 GUN IS HAS THE BEST WIRE FEED TECHNOLOGY

4. Uses standard four inch spools of wire, not "oddball" spool type that locks you into expensive OEM wire.

5. Gun comes standard with FIFTY-FOOT LEADS (not the competitions Thirty-feet)  this makes it ideal for aluminum truck, aluminum trailer repair, and aluminum fabrication-in shop or in the field! The gun can be ordered with shorter or longer leads, please request a quote

CLICK HERE TO SEE THE BEST QUALITY IN SPOOL GUNS!

6. The AEC Spool Gun with external AEC-200 4C control box, can be easily configured to work with any mig (constant potential) power supply. If you need to upgrade your power supply or change brands, you do not have to replace your AEC-200, it will work with any mig power supply. We have installed the AEC-200 gun on Miller, Hobart, Lincoln, Linde, L-tec, Esab, OTC, Marquette, Matco, Systematics, Century, Snap-On, Thermal-Arc, Cebora, and many more.

7. We also have a version that has constant voltage speed control and secondary contactor, this unit is designed to be used with a constant current (Stick) power supplies. For more information or to place an order, contact us at through the links at the bottom of this page.

COMPARE THE AEC-200D-4 TO THE MILLER SPOOLMATIC 30A

CLICK ON THE ENVELOPE TO SEND US A MESSAGE!

CALL US AT: 1-800-460-6474 OR SEND US A FAX AT: 281-749-8117

CLICK ON THE CHAIN TO RETURN TO OUR HOME PAGE

NOTE: Original graphics copyright Profax Inc. used by permission. Profax is a registered trademark. This webpage is copyright 2002, by Weldmart-Online. All rights reserved, no portion of this page can be reproduced in any form with prior written permission.